How to solder 5054 SMD lamp beads and Parameters of 5054
pkgled LEDSMDBEADS release time：2023-11-28 17:23:14 Reading volume：1
At present, many friends are interested in how to weld 5054 patch lamp bead 5054 patch lamp bead parameters are more interested, so Tiancheng xiaobian today sorted out some and 5054 patch lamp bead how to weld 5054 patch lamp bead parameters to share with you, I hope to help you.
5054 patch lamp bead is a common LED lamp bead, it has the advantages of high brightness, high color reduction, energy saving and environmental protection and so on, widely used in home lighting, commercial lighting, car lighting and other fields. However, for beginners, how to correctly weld the 5054 patch lamp beads may be some difficult. This paper will elaborate on the parameters and welding methods of 5054 patch bead to help readers better understand and apply this LED bead.
5054 patch lamp bead parameters
5054 The patch lamp bead is a SMD LED lamp bead of size 5.0mm×5.4mm, usually composed of red, green and blue LED chips, which can also be combined into other colors as needed.5054 The working voltage of the patch lamp bead is generally 2.8V-3.4V, the current is 20 mA, the power is 0.2W, and the luminous Angle is generally 120.5054 The luminous effect of the patch lamp bead is more uniform and soft than the LED lamp bead of other sizes, which is suitable for lighting and billboard backlight.
In addition, the 5054 bead has the following characteristics:
High brightness: 5054 patch lamp beads shine brighter than other lamp beads of the same size.
High color reduction: 5054 patch the light of the lamp bead is relatively pure, and the color reduction degree is high.
Energy saving and environmental protection: 5054 patch lamp bead power is low, can effectively save energy, but also meet the requirements of environmental protection.
Method of welding the 5054 patch lamp beads
Before welding the 5054 patch lamp bead:
5054 Patch of lamp beads
Next, the specific welding methods are:
First, install the socket on the PCB board, and pay attention to the arrangement and direction of the socket.
Welding the positive electrode of the 5054 patch lamp bead with the positive electrode on the socket, the negative electrode.
In the welding process, attention should be paid to the temperature of the flipping iron should not be too high, otherwise it will burn out the 5054 patch lamp beads.
After the welding is completed, a multimeter can be used to detect whether the positive and negative poles of the 5054 patch lamp beads are correctly connected.
Welding 5054 patch lamp beads precautions
In the process of welding 5054 patch lamp bead:
The temperature of the soldering iron should not be too high, and it is generally controlled at about 300℃.
Welding time should not be too long, generally controlled within 3 seconds.
In the welding process, it is necessary to keep a stable hand and a calm state of mind to avoid jitter and deviation.
Before welding, ensure that the welding area is dry, dust-free, oil-free, etc.
After welding, the welding quality needs to check to ensure that the solder joint is firm, no short circuit and other problems.
5054 Application of patch lamp beads
5054 Patch lamp beads are widely used in home lighting, commercial lighting, automotive lighting and other fields, the specific applications are as follows:
Home illumination: 5054 patch lamp bead can be used at all kinds of lamps and lanterns, wait like chandelier, wall lamp, floor lamp, bring soft light for the family.
Commercial lighting: 5054 patch lamp beads can be used for the lighting of commercial places, such as shopping malls, supermarkets, exhibition halls, etc., to provide high-quality light for commodity display.
Car lighting: 5054 patch lamp beads can be used for car lighting, such as car lights, instrument panel, interior lights, etc., to improve driving safety.
The above is for the "5054 patch lamp bead how to weld 5054 patch lamp bead parameters" a detailed introduction of how do you think? For more, check out the recommendations below, which is a summary of this article
This paper expounds the parameters and welding methods of 5054 patch lamp bead in detail. We hope that readers can better understand and apply this LED lamp bead through the introduction of this paper. In practical application, it is necessary to pay attention to the temperature of the soldering iron, welding time, welding quality and other problems, to ensure the welding quality and the life of the lamp bead.5054 With the advantages of high brightness, high color reduction, energy saving and environmental protection, it is widely used in home lighting, commercial lighting, automobile lighting and other fields.
recommended to you